65 77 534 Removing and installing/replacing front right sensor (US version only)

Necessary preliminary tasks:

Version with auxiliary oil cooler

NOTE: Picture shows left side.

Release expansion rivet (1).

Remove air duct (2) in direction of arrow.

Installation note:

Make sure air duct (2) is correctly fitted in recess (3).

Fig 1: Removing Air Duct

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Picture shows left side.

Unfasten plug connection (3) and disconnect.

Release screw (2).

Tightening torque 65 77 2AZ .

Remove sensor (1).

Installation note:

Make sure sensor (1) is in correct installation position.

Fig 2: Identifying Front Right Sensor, Plug Connection And Screw

Courtesy of BMW OF NORTH AMERICA, INC.