84 31 020 Removing and installing/replacing hands-free system speaker (emergency loudspeaker)

Necessary preliminary tasks:

Disconnect connector (1).

If necessary, loosen cable straps from latch mechanisms (2).

Unlock latch mechanisms (2).

Remove speaker (3) from bracket.

Installation note:

Latch mechanisms (2) must not be damaged.

Guide lugs of the bracket must be positioned in the corresponding grooves of the speaker (3).

Fig 1: Identifying Speaker, Connector And Latch Mechanisms

Courtesy of BMW OF NORTH AMERICA, INC.

Speaker (3) must audibly engage in the bracket.