67 31 520 Removing and installing/replacing seat height adjustment drive unit

Necessary preliminary tasks: 

• Remove driver's or front passenger seat  . See 52 13 001 REMOVING AND INSTALLING FRONT SEAT, DRIVER'S SIDE or 52 13 002 REMOVING AND INSTALLING FRONT SEAT, PASSENGER'S SIDE .

Set down front seat sideways on a suitable surface.

Unfasten plug connection (1) and disconnect.

Release screws (3).

Tightening torque: 67 31 1AZ .

Feed out seat height adjustment drive unit (2) and remove.

Fig 1: Seat Height Adjustment Drive Unit And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

INITIALIZE  seat height adjustment drive unit.