67 11 555 Removing and installing/replacing actuator drive for fuel filler flap

Necessary preliminary tasks: 

• Remove COVER HOUSING

Unlock retaining lugs (2) with a suitable tool.

Remove actuator drive (1) from cover pot (3).

Fig 1: Actuator Drive And Retaining Lugs

Courtesy of BMW OF NORTH AMERICA, INC.

Release the actuator drive (2) by simultaneously turning and pressing the locking pin (1).

Installation note: 

Make sure the setting for the actuator drive (2) for the fuel filler flap is correct. It must be possible to lock or unlock the fuel filler flap completely.

Fig 2: Actuator Drive And Locking Pin

Courtesy of BMW OF NORTH AMERICA, INC.