51 61 Reinforcement, body
TIGHTENING TORQUE SPECIFICATIONS - REINFORCEMENT, BODY
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Suspension cross brace to body | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | M10x25 | Renew screws | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Rear trailing link | F31/F34 | M10x20 | Replace screw | 50 Nm |
| M12x35 | Replace screw | 100 Nm | |||
| F36 | M10 | Replace screw | 56 Nm | ||
| M12 | Replace screw | ||||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 3AZ | Strut, front partition wall | F20/F21/F22/F23/F30/F31/F32/F33/F34/F35/F36 | 19 Nm | ||
| 4AZ | Front end strut to body | F23/F33 | 28 Nm | ||
| 5AZ | Diagonal strut to adapter plate | F33 | Jointing torque | 56 Nm | |
| Angle of rotation | 90 ° | ||||
| 6AZ | Torsion strut to front axle support | F33 | M10 | Renew screws | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 7AZ | Torsion strut to side member | F33 | M12 | Renew screws | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 8AZ | Rear tension strut to cross member of luggage compartment floor | F33 | Replace screw | 56 Nm | |
| 9AZ | Rear tension strut to support | F33 | 50 Nm | ||
| 10AZ | Rear tension strut to side member | F33 | Replace screw | ||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 11AZ | Carbon brace on lock support | F80/F82 | Replace screw | 28 Nm | |
| 12AZ | Carbon brace on strut brace | F80/F82 | Replace screw | 28 Nm | |
| 13AZ | Cross-brace to spring strut dome | F80/F82 | M8 | 28 Nm | |
| 14AZ | Cross-brace to side panel | F80/F82 | M10 | 34 Nm | |
| 15AZ | Cross-brace to bulkhead | F80/F82 | M10x25 | Replace screw | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 16AZ | Cross-brace extension/additional strut to cross-brace | F80/F82 | M8 | 28 Nm | |
| 17AZ | Cross-brace extension to body | F80/F82 | M10 | 56 Nm | |
| 18AZ | Additional strut to cross-brace extension | F80/F82 | M8 | 28 Nm | |
| 19AZ | Torsion strut to front adapter plate | F33 | M10 | Replace screw | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 20AZ | Torsion strut to body | F33 | M8 | 19 Nm | |
| 21AZ | Lower partition wall of units compartment to body | F20/F21 | M8x18 | 19 Nm | |