51 16 210 Removing and installing/replacing the trim for the selector lever
Overview of Activities
Key processes
- Remove trim for selector lever
- Install trim for selector lever
Additional Information
Overview Special Tool
Use in Activity: 1
0 493 687 (00 9 340) Dismantling aid
SPECIAL TOOLS DESCRIPTION
| Usage | (Dismantling aid (2 x)) For levering out switch block on driver's door. |
| Included in the tool or work | |
| Storage location | |
| Replaced by | |
| In connection with | |
| SI-Number | 01 15 99 (483) |
SPECIAL TOOLS DESCRIPTION
| Pos | BMW Order number | Replaced by | Designation | In Connection with |
|---|---|---|---|---|
| 1 | 0 496 289 (00 9 341) | Dismantling aid Only available as a set (2 tools) under 00 9 340 (= 83 30 0 493 687). |
General information
safety instructions
RISK OF DAMAGE
Scratches.
Tools and sharp-edged components can cause scratches.
- Protect working area.
- Handle tools and components carefully.
Key processes
- Remove trim for selector lever
- Partially fit special tool 0 493 687 (00 9 340) as pictured.
- Lift trim for selector lever (1) all around and remove upwards.
- If necessary, unlock associated plug connection and disconnect.
- Install trim for selector lever
TECHNICAL INFORMATION
Latch mechanisms, guides and mounting elements must not be damaged or missing.
TECHNICAL INFORMATION
Remount the Drivelogic button when replacing the trim for the selector lever in F80/F82/F83.
- Check latch mechanisms for damage, if necessary replace trim for selector lever.
- Clip in trim for selector lever (1) .