51 23 100 Removing and installing/replacing right engine compartment lid lock

Necessary preliminary work (F23 and F33 only): 

• Remove right FRONT-END STRUT 

Release screws (1) and feed out engine compartment lid lock (2).

Tightening torque: 51 23 1AZ

Fig 1: Engine Compartment Lid Lock And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip grommet (1).

Unhook Bowden cable (2) from engine compartment lid lock (3).

Fig 2: Removing Bowden Cable From Engine Compartment Lid Lock

Courtesy of BMW OF NORTH AMERICA, INC.