51 41 017 Remove and install/replace cover on door handle, front left or right
Overview of Activities
Key processes
- Remove front left or right door handle cover
- Installing the front left or right door handle cover
Additional Information
Overview Special Tool
Use in Activity: 1
0 490 538 (00 9 321) Folding stick
SPECIAL TOOLS DESCRIPTION
| Usage | |
| Included in the tool or work | 0 490 527 |
| Storage location | |
| Replaced by | |
| In connection with | |
| SI-Number | 01 07 09 (530) |
General information
Key processes
- Remove front left or right door handle cover
RISK OF DAMAGE
Scratches.
Tools and sharp-edged components can cause scratches.
- Protect working area.
- Handle tools and components carefully.
Insert special tool 0 490 538 (00 9 321) from below into recess of cover 1.
Lift out cover 1 with special tool 0 490 538 (00 9 321) at clamps 2.
Guide out cover 1 downward from retaining hook 3.
- Installing the front left or right door handle cover
RISK OF DAMAGE
Scratches.
Tools and sharp-edged components can cause scratches.
- Protect working area.
- Handle tools and components carefully.
Following parts of cover must not be damaged or missing.
Latch mechanisms (1)
Clamps (2)
Retaining hook (3)
First guide in cover 1 with retaining hook 3 in door trim panel, then clip into door trim panel.