33 33 Rear Axle Suspension
TIGHTENING TORQUE SPECIFICATION - REAR AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle support with rubber mounts to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | 165 Nm | |
| F25/F26 | M12 | Replace screws. Jointing torque Angle of rotation |
100 Nm 90 ° |
|
| 2AZ Compression strut, front, to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M10 | Replace screws. Jointing torque Angle of rotation |
56 Nm 45 ° |
| F25/F26 | M12 | 100 Nm | ||
| 3AZ Rear compression strut to body | F03 | M10 | Replace screws. Jointing torque Angle of rotation |
56 Nm 45 ° |
| 4AZ Vibration absorber to rear axle support, front | F10/F11/F12/F13 | M8 | 19 Nm | |
| 5AZ Reinforcement plate to rear axle support | F06 M6/F10 M5/F12 M6/F13 M6 | M10 | 56 Nm | |
| 6AZ Reinforcement plate on cross reinforcement | F12M | M12 | Replace screws Jointing torque Angle of rotation |
100 Nm 90 ° |