33 41 Wheel Bearings
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - WHEEL BEARINGS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Output shaft on drive flange hub | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M27 | Replace collar nut. Jointing torque and angle of rotation must be observed without fail. Jointing torque Angle of rotation |
100 Nm 45 ° |
| F06 M6/F10 M5/F12 M6/F13 M6 | M16 | Observe the repair instructions. Replace collar bolt and spring. Jointing torque Angle of rotation |
50 Nm 155 ° |
|
| F03 | M27 | Replace collar nut. | 420 Nm | |
| 2AZ Wheel bearing to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 | M12 | Replace screws. | 100 Nm |