33 32 Trailing arms and struts
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - TRAILING ARMS AND STRUTS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Swinging arm/cross-strut to rear axle support, front | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
165 Nm 90 ° |
| F06 M6/F10 M5/F12 M6/F13 M6 | M12 | Replace screw and nut. | 100 Nm | |
| F03 | M16 | Replace screw and nut. | 250 Nm | |
| 2AZ Swinging arm to rear axle support, rear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
175 Nm |
| F03 | M18 | Replace eccentric bolt, eccentric washer and nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
100 Nm 180 ° |
|
| 3AZ Swinging arm to wheel carrier, rear | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M16 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
265 Nm |
| F03 | M18 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
360 Nm 180 ° |
|
| 4AZ Swinging arm/integral link | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace screw and nut. Jointing torque Angle of rotation |
165 Nm 45 ° |
| F03 | M16 | Replace screw and nut. | 250 Nm | |
| 5AZ Integral link to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | 108 Nm | |
| F03 | M16 | 250 Nm | ||
| 6AZ Toe arm to bearing support/to Integral Active Steering | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
100 Nm 90 ° |
| F06 M6/F10 M5/F12 M6/F13 M6 | M12 | Replace nut. | 100 Nm | |
| F03 | M14 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
125 Nm 90 ° |
|
| 7AZ Toe arm to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace nut. | 165 Nm |
| F03 | M14 | 110 Nm | ||
| 8AZ Wishbone to rear axle support | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
175 Nm |
| F03 | M18 | Replace nut. TIGHTEN DOWN IN NORMAL POSITION . |
280 Nm | |
| 9AZ Wishbone to wheel carrier | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
90 Nm 180 ° |
| F03 | M18 | Replace screw and nut. TIGHTEN DOWN IN NORMAL POSITION . Jointing torque Angle of rotation |
200 Nm 180 ° |
|
| 10AZ Heat shield to toe arm | F01/F02 | M5 | Replace nut. | 6.8 Nm |
| 11AZ Toe link bearing bracket to rear axle support | F01/F02/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | Replace screws and nuts. | 165 Nm |