33 33 Rear Axle Suspension
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Rear axle support with rubber mounts to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | 165 Nm | |
| F25/F26 | M12 | Replace screws. Jointing torque Angle of rotation |
100 Nm 90 ° |
|
| 2AZ Compression strut, front, to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M10 | Replace screws. Jointing torque Angle of rotation |
56 Nm 45 ° |
| F25/F26 | M12 | 100 Nm | ||
| 3AZ Rear compression strut to body | F03 | M10 | Replace screws. Jointing torque Angle of rotation |
56 Nm 45 ° |
| 4AZ Vibration absorber to rear axle support, front | F10/F11/F12/F13 | M8 | 19 Nm | |
| 5AZ Reinforcement plate to rear axle support | F06 M6/F10 M5/F12 M6/F13 M6 | M10 | 56 Nm | |
| 6AZ Reinforcement plate on cross reinforcement | F12M | M12 | Replace screws Jointing torque Angle of rotation |
100 Nm 90 ° |