37 13 Hydraulic lines
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - HYDRAULIC LINES
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Pressure line for front axle oscillating motor to valve block | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M8 | 19 Nm | |
| 2AZ Pressure line for rear axle oscillating motor to valve block | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M8 | 19 Nm | |
| 3AZ Pressure lines to valve block | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M8 | 19 Nm | |
| 4AZ Pressure lines to oscillating motor | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M8 | 19 Nm | |
| 5AZ Screw connection, pressure lines | F01/F02/F06/F07/F10/F11/F12/F13/F18 | 30 Nm | ||
| 6AZ Line holder to compression strut | F01/F02/F06/F07/F10/F11/F12/F13/F18 | 8 Nm | ||
| 7AZ Dynamic Drive line clip to rear axle support/front axle support | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M6 | 8 Nm | |
| 8AZ Flange screw connection, pressure line | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M6 | 8 Nm | |
| 9AZ Line holder to front axle support | F01/F02/F06/F07/F10/F11/F18 | 6 Nm | ||
| 10AZ ARS line to hydraulic pump/power steering pump | F01/F02/F06/F07/F10/F11/F12/F13/F18 | 12 Nm | ||
| 11AZ ARS expansion hose Part 1 to part 4 | F01/F02/F07 | M6 | 12 Nm | |
| 12AZ ARS lines rear axle 1+2 to underfloor line 1+2 | F01/F02/F06/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 13AZ Return line, short to valve block | F01/F02/F06/F07/F10/F11/F12/F13 | 19 Nm | ||
| 14AZ Return line, part 2 to return line, short | F01/F02/F06/F07/F10/F11/F12/F13 | 19 Nm |