51 35 Power windows, rear
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATION - REAR POWER WINDOWS
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Door window glass to power window regulator | F06/F07 | Multipoint screw With special tool 51 3 240 and torque wrench (long lever arm) |
12 Nm 9 Nm |
|
| 2AZ Side window, stationary to inner door panel | F06/F07 | M6 | 7.5 Nm | |
| 3AZ Side window, stationary to door bottom | F06/F07 | M6 | 7.5 Nm | |
| 4AZ Preloading adjustment | F06/F07 | M8 | 16 Nm | |
| 5AZ Roller sunblind drive to inner door panel | F07 | 3 Nm | ||
| 6AZ Adjustment cavity gap | F06/F07 | M6 | 9.5 Nm | |
| 7AZ Window regulator to inner door panel | F06/F07 | M6 | 9.5 Nm | |
| 8AZ Flat motor to inner door panel/mounting plate | F06/F07 | 3 Nm | ||
| 9AZ Flat motor holder to inner door panel | F07 | 3 Nm | ||
| 10AZ Mounting plate on inner door panel | F06 | 8 Nm |