LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> ActiveHybrid 7 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1452 (Steering And Wheel Alignment - Repair -- 6-Series Gran Coupe (Sedan)) >> Safety And General Information >> 32 00 150 KDS chassis/wheel alignment check with vehicle load up to design position >> 32 00... Test conditions for chassis/wheel alignment check

32 00... Test conditions for chassis/wheel alignment check

WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2019 BMW M6 Gran Coupe, 2019 BMW 650i Gran Coupe xDrive, 2019 BMW 650i Gran Coupe, 2019 BMW 640i Gran Coupe xDrive, and 2019 BMW 640i Gran Coupe. However, it is still accessible from the selected car via links, so may be relevant.

Observe the following test conditions prior to the chassis/wheel alignment check:

  1. Only BMW approved wheel and tire combinations may be installed on the vehicle
  2. Correct tread depth. The tread depth for each axle may differ from left to right by max. 1-2 mm.
  3. Correct tire pressure (see label on vehicle).
  4. All chassis and suspension components must be technically OK.
  5. Condition of suspension and shock absorbers OK: Visually inspect for breakage, etc.
  6. Vehicles with self-levelling suspension: Pull fuse of air supply system so that there is no controlling down or up.
scientia non olet · About LEMON Manuals