51 13 400 Removing and installing or replacing rear center trim

Necessary preliminary tasks:

NOTE: Detaching rear center trim is shown on the left side; proceed in same way for detaching on the right side.

Release nut (1) on rear center trim (2).

Tightening torque 51 13 1AZ .

Fig 1: Identifying Rear Center Trim With Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Unclip plastic clips (1) with rear lid opened.

Remove complete rear center trim (2) in direction of arrow.

Fig 2: Removing Rear Center Trim With Plastic Clips

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

If necessary, replace faulty plastic clips (1).

Fig 3: Identifying Plastic Clips

Courtesy of BMW OF NORTH AMERICA, INC.