51 47 000 Removing and installing/replacing front left or right door sill cover strip (inside)

Special tools required:

Carefully lever out trim (1) using special tool 00 9 323 from door sill cover strip (2).

Fig 1: Removing Door Sill Cover Strip Using Special Tool (00 9 323)

Courtesy of BMW OF NORTH AMERICA, INC.

Release expanding rivet (1).

Release screw (2).

Fig 2: Identifying Expander Rivets With Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lever out door sill cover strip (1) with special tool 00 9 318 .

Fig 3: Removing Door Sill Cover Strip Using Special Tool (00 9 318)

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

If necessary, replace expanding rivets and clamps on door sill cover strip (1).

Fig 4: Identifying Rivets And Clamps On Door Sill Cover Strip

Courtesy of BMW OF NORTH AMERICA, INC.