11 36 Variable camshaft control
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ VANOS gear to intake and exhaust camshafts | N74 | M10x1 | Replace screw, grease contact surfaces with copper paste | |
| Jointing torque | 30 Nm | |||
| Torque angle | 90 ° | |||
| 2AZ Non-return valve VANOS to cylinder head | N74 | M14 x 1.5 | 20 Nm | |
| 3AZ Solenoid valve holder to cylinder head | N74 | M6 | 10 Nm |