51 43 230 Removing and installing / replacing trim on C-pillar at bottom left or right

Necessary preliminary tasks: 

• Remove BELT OUTLET TRIM 
• Remove ENTRANCE COVER STRIP 
• Remove BACKREST

Release plastic nuts (1).

Fig 1: Identifying C-Pillar Trim Panel Plastic Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Release plastic nuts (1).

Lever out clip (2).

Unclip trim.

Installation: 

If necessary, replace faulty clip and retainers on trim.

Make sure trim is correctly seated in seal.

Fig 2: Removing Trim Clip

Courtesy of BMW OF NORTH AMERICA, INC.