Installing luggage compartment floor and side member reinforcements

Clean all  bonding surfaces with cleaning agent R1.

Apply adhesive to bonding surfaces.

Install new parts and rivet with blind rivets.

Perform MAG welding throughout to new part in area (1).

Set 20 mm MAG welds at a distance of 15 mm in area (2).

Fig 1: Identifying Middle Luggage Compartment Floor MAG Welding Areas

Courtesy of BMW OF NORTH AMERICA, INC.

Weld new parts in area (5).

(1) to (4) = Adhesive riveted areas.

Fig 2: Identifying Middle Luggage Compartment Floor Adhesive Riveted Areas And Weld Area

Courtesy of BMW OF NORTH AMERICA, INC.