52 24 010 Removing and installing/replacing backrest for rear seat

Necessary preliminary tasks:

Unfasten plug connection (1) and disconnect.

Unfasten screws (2).

Tightening torque: see 1AZ in 52 24 REAR SEAT, MANUAL

Fig 1: Identifying Plug Connection And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Open center armrest.

Detach cover from adhesive band.

Release screws (1).

Tightening torque: see 1AZ in 52 24 REAR SEAT, MANUAL

Remove backrest.

Fig 2: Identifying Backrest Screws

Courtesy of BMW OF NORTH AMERICA, INC.