84 31 020 Removing and installing/replacing hands-free system speaker

Necessary preliminary tasks: 

• Remove trim panel for pedal mechanism. See TRIM PANEL FOR PEDAL ASSEMBLY (US ONLY) or TRIM PANEL FOR PEDAL ASSEMBLY (ECE ONLY) .

Disconnect plug connection (1).

If necessary, release cable straps from latch mechanisms (2).

Unlock latch mechanisms (2) and remove speaker (3) from bracket.

Installation note: 

Latch mechanisms (2) must not be damaged.

Fig 1: Identifying Catches And Speaker With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Guide lugs of bracket must be seated in grooves of speaker (3).

Speaker (3) must snap audibly into place in bracket.