51 11 Front Bumper
TIGHTENING TORQUE SPECIFICATION - FRONT BUMPER
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Bumper to air duct, top | F01/F02/F03/F04/F07/F10/F11/F18 | 4 Nm | ||
| 2AZ | Deformation element, top or bottom, to vertical connection | F01/F02/F03/F04/F07/F10/F11/F18 | 11.8 Nm | ||
| 3AZ | Deformation element to engine support | F01/F02/F03/F04/F07/F10/F11/F18/F25 | M12 | Replace bolts | |
| Jointing torque | 80 Nm | ||||
| Angle of rotation | 270 ° | ||||
| 4AZ | Support to deformation element | F01/F02/F03/F04/F07/F10/F11/F18 | Replace screws and nuts | 27 Nm | |
| F25 | M8 | 20 Nm | |||
| 5AZ | Support to deformation element, bottom | F01/F02/F03/F04/F07/F10/F11/F18 | 11 Nm | ||
| 6AZ | Deformation element, bottom, to adapter plate, front axle support | F01/F02/F03/F04/F07/F10/F11/F18 | 19 Nm | ||
| 7AZ | V - support to deformation element, top | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 19 Nm | ||
| 8AZ | Number plate to bumper | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 1 Nm | ||
| 9AZ | Number plate to bumper (thread repair) | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | M5 | 4.5 Nm | |
| 10AZ | Support, bottom, to deformation element, bottom | F01/F02/F03/F04/F07/F10/F11/F18 | 11 Nm | ||
| 11AZ | Bumper to side wall | F01/F02/F03/F04/F07/F10/F11/F12/F13/F18 | 3 Nm | ||