LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2015 >> 535i Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - Oil Pan, Crankshaft Seal, Timing Case Cover, Crankcase Ventilation System - Repair >> Crankshaft Seal, Timing Case Cover >> N57 Diesel Engine >> 11 14 005 Replacing front crankshaft seal (N57 Diesel)

11 14 005 Replacing front crankshaft seal (N57 Diesel)

Special tools required: 

IMPORTANT: Accelerator pedal module rings must be installed in a dry condition.
Do not use engine oil or lubricant.

Necessary preliminary tasks: 

Fasten special tool 11 8 801 on the crankshaft with 11 8 802 .

NOTE: Graphic N47.
Fig 1: Fastening Special Tool 11 8 801 On Crankshaft With Special Tool 11 8 802
G09919766Courtesy of BMW OF NORTH AMERICA, INC.

Position accelerator pedal module ring on the special tool 11 8 801 .

NOTE: Graphic N47.
Fig 2: Positioning Accelerator Pedal Module Ring On Special Tool 11 8 801
G09919767Courtesy of BMW OF NORTH AMERICA, INC.

Pull on accelerator pedal module-ring with special tool 11 8 803 and 11 8 804 .

Screw in special tool 11 8 803 until it is flush with the crankcase.

NOTE: Graphic N47.
Fig 3: Identifying Special Tools
G09919768Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

IMPORTANT: Do not start engine without drive belt (risk of damage!)  .

Check engine for leak tightness.

scientia non olet · About LEMON Manuals