11 00 Mounting engine on assembly stand (N57 Diesel)

Special tools required: 

• 00 2 300 .
• 00 2 320 .
• 00 2 322 .
• 00 2 328 .

Necessary preliminary tasks: 

• Remove ENGINE .
• Remove engine support arm on left and right. See RIGHT ENGINE SUPPORT ARM and LEFT ENGINE SUPPORT ARM . For AWD vehicles with N57 engine, see applicable procedure for LEFT ENGINE SUPPORT ARM .

Prepare special tool 00 2 300 together with the special tool 00 2 320 .

Fig 1: Removing Engine Support Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Attach special tool 00 2 328 to fixture (L) on left of engine support arm with screws (1).

Fig 2: Attaching Special Tool (00 2 328) To Fixture (L) Of Engine Support Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Attach special tool 00 2 328 to fixture (R) on right of engine support arm with screws (1).

Fig 3: Attaching Special Tool (00 2 328) To Fixture (R) Of Engine Support Arm

Courtesy of BMW OF NORTH AMERICA, INC.