63 31 185 Replacing LED for luggage compartment lighting (left or right)

Necessary preliminary tasks :

NOTE: Work shown on the F32 by way of example, deviations in detail are possible in other models.

Release latch mechanisms (1) and lift out LED module (2).

Carefully release latch mechanism (3) on LED module (2) with a suitable tool.

Pull LED module (2) off of fibre-optic conductor (4) in direction of arrow.

Installation note :

Make sure that the fibre-optic conductor (4) latches correctly in LED module (2).

Catches (1; 3) must not be damaged or missing.

Fig 1: Pulling LED Module Off Of Fibre-Optic Conductor

Courtesy of BMW OF NORTH AMERICA, INC.