Procedure To Reset The CBS Display BMW Group Diagnostic System (Except The E65 And E66): Notes
Using the BMW diagnostic system, the CBS Reset sets the selected service item to 100% (full service interval) and displays a service counter indicating how many times the service item has been reset.
The CBS reset procedure is found under: Diagnosis - Function Selection - Service Functions - Maintenance - CBS Reset - Test Plan. Then highlight the listed procedure and press the bottom right corner green arrow to the right.
The next screen offers 3 selection menus:
| Selection 1: CBS reset | Selection 2: CBS reset | Selection 3: End |
|---|---|---|
| 1. Engine oil | 1. Spark plugs | |
| 2. Microfilter | 2. Brake fluid | |
| 3. Front brakes | 3. Coolant | |
| 4. Rear brakes | 4. State Safety inspection | |
| 5. Vehicle check | 5. Emissions inspection |
The CBS vehicle data correction allows "quick access" to correct or change the basic data stored in the vehicle after the CBS reset. This procedure is found under: Diagnosis - Function Selection - Service Functions - Maintenance - CBS Correction, Vehicle Data - Test Plan. Then highlight the listed procedure and press the bottom right corner green arrow to the right.
The next screen offers 4 selection menus:
| Selection 1: Correction | Selection 2: Correction | Selection 3: Correction | Selection 4: End |
|---|---|---|---|
| 1. Engine oil | 1. Spark plugs | 1. Telephone numbers | |
| 2. Microfilter | 2. Brake fluid | 2. Date of first registration | |
| 3. Front brakes | 3. State Safety inspection | 3. Reset annual kilometer setting. | |
| 4. Rear brakes | 4. Emissions inspection | ||
| 5. Vehicle check |