51 22 300 Removing and installing/replacing outer weather strip on rear door on left or right

Special tools required:

IMPORTANT: Observe PROCEDURE for using special 00 9 324 .

IMPORTANT: If reusing the existing weather strip (1), make sure it is not bent.

Lever out weather strip (1) with special tool 00 9 324 (startng at B-pillar).

Simultaneously lift out weather strip (1) with special tool 00 9 317 in the vicinity of the B-pillar.

Fig 1: Pulling Off Window Cavity Cover

Courtesy of BMW OF NORTH AMERICA, INC.