11 12 Cylinder head with cylinder head cover
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD WITH CYLINDER HEAD COVER
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt | N55 | M11 x 173 | Replace screws. Jointing torque 1. Angle of rotation 2. Angle of rotation |
30 Nm 90 ° 180 ° |
| 2AZ Cylinder head bolt | N55 | M9 x 170 | Replace screws. Jointing torque 1. Angle of rotation 2. Angle of rotation |
30 Nm 90 ° 180 ° |
| 3AZ Cylinder head bolt | N55 | M9 x 30 M9 x 70 |
22 Nm | |
| 4AZ Cylinder head cover to cylinder head. | N55 | M6 | 8.5 Nm | |
| 5AZ Towing lug to cylinder head | N55 | 30 Nm | ||
| 6AZ Ignition coil cover to cylinder head cover. | N55 | M6 x 30 | 4 Nm | |
| 7AZ Metal bracket for ignition coil cover to cylinder head cover. | N55 | M6 x 16 | 8 Nm | |
| 8AZ Ignition coils and injector slot to cylinder head | N55 | M6 x 30 | 8.5 Nm | |
| 9AZ EMC plate to ignition coils and injector slot (EMC = electromagnetic compatibility) | N55 | M6 x 20 | 8.0 Nm | |
| 10AZ EMC plate to ignition coils and injector slot (EMC = electromagnetic compatibility) | N55 | M6 x 18.5 | Earth connection | 8.5 Nm |
| 11AZ Screw plug in oil chamber | N55 | M16 x 1.5 | Replace screw with sealing ring | 27 Nm |