11 12 Cylinder head with cylinder head cover
TIGHTENING TORQUE SPECIFICATION - CYLINDER HEAD WITH CYLINDER HEAD COVER
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Cylinder head bolt | N20/N26 | M11 x 173 | Renew screws. Jointing torque 1. Angle of rotation 2. Angle of rotation |
30 Nm 90 ° 180 ° |
| 2AZ Cylinder head bolt | N20/N26 | M9 x 173 | Renew screws. Jointing torque 1. Angle of rotation 2. Angle of rotation |
30 Nm 90 ° 180 ° |
| 3AZ Cylinder head bolt | N20/N26 | M9 x 30 M9 x 70 |
22 Nm | |
| 4AZ Cylinder head cover to cylinder head. | N20/N26 | M6 | 9 Nm | |
| 5AZ Towing lug to cylinder head | N20/N26 | 30 Nm | ||
| 6AZ Ignition coils and injector slot to cylinder head | N20/N26 | M6 x 35 | 10 Nm | |
| 7AZ Earth connection for cylinder head | N20/N26 | M5 | Earth connection | 6 Nm |
| 8AZ Plug | N20/N26 | M16 x 1.5 | Replace screw with sealing ring. | 27 Nm |
| 9AZ Flange to cylinder head cover | N20/N26 | 6x18 | Self-tapping plastic screw | 14 Nm |