11 22 510 Removing and installing/replacing flywheel (transmission removed - N63O1)
WARNING: This page is about a different variant/trim than selected.
Special tools required:
Necessary preliminary tasks:
- Remove automatic transmission. See REMOVING AUTOMATIC TRANSMISSION or REMOVING AUTOMATIC TRANSMISSION (WITH AWD) .
- Remove MANUAL TRANSMISSION
- Remove CLUTCH
Manual transmission:
Secure flywheel (1) with special tool 11 9 260 .
Graphic S63.
Automatic transmission:
Release flywheel screws in area (1).
Remove flywheel (2).
Installation note:
Clean thread of flywheel bolts in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws.
Tightening torque 11 22 1AZ .
Manual transmission:
Release flywheel screws in area (1).
Remove flywheel (2).
Installation note:
Clean thread of flywheel bolts in crankshaft.
Flywheel (2) is secured with an alignment pin.
Fit flywheel (2).
Fit new flywheel screws.
Tightening torque 11 22 1AZ .
Reassemble the vehicle.