11 33 062 Removing and installing/replacing all hydraulic valve clearance compensating elements (HVC) (N63O1)
WARNING: This page is about a different variant/trim than selected.
Special tools required:
Necessary preliminary work:
- Remove all rocker arms. See REMOVING ALL ROCKER ARMS, LEFT SIDE or REMOVING ALL ROCKER ARMS, RIGHT SIDE .
Remove hydraulic valve clearance compensating elements (1) in direction of arrow.
If the valve clearance compensating elements are to be reused, set them down in an orderly fashion on special tool 11 4 480 .
Assemble engine.