11 65 Connection diagram, vacuum activation (N63)
WARNING: This page is about a different variant/trim than selected.
- Connection (1) black to exhaust flaps.
- Distributor element (2), vacuum pump/vacuum reservoir (4).
- Vacuum line (3) black to vacuum pump.
- Vacuum reservoir (4) with three connections.
- Connection, vacuum unit (wastegate), bank 2, cylinders 5 to 8.
- Connection, vacuum unit (wastegate), bank 1, cylinders 1 to 4.
- Vacuum hose (7) yellow up to 7/10 at vacuum unit connection (5) to pressure converter (OUT), bank 2 cylinders 5 to 8.
- 7 Vacuum hose (7) (as of 7/10, the vacuum line is plastic), vacuum unit connection (5) to the pressure converter (OUT), bank 2 cylinder 5 to 8.
- 8 Vacuum hose black to vacuum reservoir connection to pressure converter (VAC) bank 2 cylinders 5 to 8.
- 9 Vacuum hose (9) up to 7/10 red at vacuum unit connection (6) to pressure converter (OUT), bank 1 cylinders 1 to 4.
- 9 Vacuum hose (9) (as of 7/10 red , the vacuum line is plastic), vacuum unit connection (6) to pressure converter (OUT), bank 1 cylinders 1 to 4.
- 10 Vacuum hose black to vacuum reservoir connection to pressure converter (VAC) bank 1 cylinders 1 to 4.