11 00 Mounting Engine On Assembly Stand (N63)

WARNING: This page is about a different variant/trim than selected.

Special tools required:

WARNING:

Remove engine with hoist and special tool 11 0 020 .

Fit special tool 11 8 930 on engine.

Engine weighs approx. 280 kg.

Necessary preliminary tasks:

- Remove ENGINE .

- Clean contact surfaces.

Use special tool 11 8 931 to mount special tool 11 8 932 .

Insert screws (1 and 2).

Tightening torque: 11 11 9AZ .

Fig 1: Identifying Special Tool And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Use special tool 11 8 931 to mount engine on special tool 00 2 300 .

Tightening torque: 11 11 10AZ

Fig 2: Mounting Engine On Special Tool (00 2 300) Using Special Tool (11 8 931)

Courtesy of BMW OF NORTH AMERICA, INC.