313110 - Holding sleeve AM

WARNING: This page is about a different variant/trim than selected.

Replaced by: 83300493555

NOTE: (Centring sleeve set for piston rod/shock absorber) Spring tensioner 31 3 110/111 for tensioning coil springs/Replaced by 31 3 340 (0 493 555).

Consisting of:

0494440 Spring tensioner
NOTE: Replaced by 31 3 340 (0 493 555)
0494441 Holding sleeve
NOTE: (Centring sleeve) Replaced by 31 3 340 (0 493 555)
0494442 Holding sleeve
NOTE: (Centring sleeve) Internal thread M18x1.5 Replaced by 31 3 340 (0 493 555)
0494443 Holding sleeve
NOTE: (Centring sleeve) Internal thread M10x1 Replaced by 31 3 340 (0 493 555)
0494444 Holding sleeve
NOTE: (Centring sleeve) Internal thread M12x1.5 Replaced by 31 3 340 (0 493 555)

Fig 1: Identifying Holding Sleeve (313110)
Courtesy of BMW OF NORTH AMERICA, INC.