11 21 Crankshaft guide bearing - S63TU
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATION - S63TU
| Grinding stages, crankshaft guide bearing |
|
|
| Original |
mm |
28+0.053+0.020 |
| Level 1 |
mm |
28.2+0.0530.020 |
| Crankshaft side clearance |
mm |
0.080... 0.246 |
| Coefficient of friction - crankshaft |
Nm |
MAX 5 |