11 21 Main bearing journals 2 through 5
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATION
| Grinding stage of main bearing journals | Bearing journal 2-5 | |
| Original (identification S1) | mm | 64.984... 64.990 |
| Original (identification S2) | mm | 64.977... 64.983 |
| Original (identification S3) | mm | 64.971... 64.976 |
| Grinding stage 1 (identification B1) | mm | 64.734... 64.740 |
| Grinding stage 1 (identification B2) | mm | 64.727... 64.733 |
| Grinding stage 1 (identification B3) | mm | 64.721... 64.726 |
| Crankshaft bearing clearance, radial | mm | 0.020... 0.046 |
| Max. permitted runout at main bearing journal | mm | 0.15 |