11 21 Main bearing journal 1
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATION
| Grinding stage of main bearing journals | Bearing journal 1 | |
| Original (identification S1) | mm | 64.974... 64.980 |
| Original (identification S2) | mm | 64.967... 64.973 |
| Original (identification S3) | mm | 64.961... 64.966 |
| Grinding stage 1 (identification B1) | mm | 64.724... 64.730 |
| Grinding stage 1 (identification B2) | mm | 64.717... 64.723 |
| Grinding stage 1 (identification B3) | mm | 64.711... 64.716 |
| Crankshaft bearing clearance, radial | mm | 0.020... 0.046 |
| Max. permitted runout at main bearing journal | mm | 0.15 |