11 21 Crankshaft guide bearing
WARNING: This page is about a different variant/trim than selected.
CRANKSHAFT AND BEARINGS SPECIFICATION
| Grinding stages, crankshaft guide bearing |
|
|
| Original |
mm |
24.020... 24.053 |
| Stage 1 |
mm |
No machining possible |
| Size 2 |
mm |
No machining possible |
| Crankshaft axial play |
mm |
0.060... 0.250 |
| Friction coefficient of crankshaft |
Nm |
2 to 2.5 |