36 10 Wheels
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - WHEELS
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ |
Wheel bolt |
F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18/F25/F26 |
M14 |
- Screw in the wheel bolts and evenly tighten by hand in a crosswise sequence in order to centre the wheel rim.
- Tighten the wheel bolts to the specified tightening toque in a crosswise sequence using a calibrated torque wrench.
- Check all wheel bolts in the same sequence and retighten to the prescribed tightening torque if necessary.
|
140 Nm |