54 10 150 Removing and installing/replacing front floating headlining

Necessary preliminary work: 

• Remove GLASS TILT SUNROOF COVER 

Open floating headlining (1) until screws (2) are still accessible.

Unfasten screws (2).

Tightening torque 54 10 03AZ .

Fig 1: Identifying Floating Headlining And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Slide floating headlining (1) uniformly forwards.

If necessary, raise slider (2) for floating headlining.

Move slider (2) back to the point where there is no longer any contact to the floating headlining.

Fig 2: Raising Slider And Sliding Floating Headlining Forward

Courtesy of BMW OF NORTH AMERICA, INC.

Remove floating headlining (1) as follows:

1. Press to the right in guide rail (2) of slider
2. Raise upward
3. Remove in direction of arrow.
Fig 3: Removing Front Floating Headlining
Courtesy of BMW OF NORTH AMERICA, INC.