33 33 Rear Axle Suspension
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE SUSPENSION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear axle support with rubber mounts to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | 165 Nm | |
| F25/F26 | M12 | Replace screws. | |||
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Compression strut, front, to body | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M10 | Replace screws. | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 45 ° | ||||
| F25/F26 | M12 | 100 Nm | |||
| 3AZ | Rear compression strut to body | F03 | M10 | Replace screws. | |
| Jointing torque | 56 Nm | ||||
| Angle of rotation | 45 ° | ||||
| 4AZ | Vibration absorber to rear axle support, front | F10/F11/F12/F13 | M8 | 19 Nm | |
| 5AZ | Reinforcement plate to rear axle support | F06 M6/F10 M5/F12 M6/F13 M6 | M10 | 56 Nm | |
| 6AZ | Reinforcement plate on cross reinforcement | F12M | M12 | Replace screws | |
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||