33 17 Rear axle differential mountings
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - REAR AXLE DIFFERENTIAL MOUNTINGS
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Rear differential to rear axle carrier, front | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M12 | FOLLOW REPAIR INSTRUCTION
. Replace screws. |
|
| Jointing torque | 100 Nm | ||||
| Angle of rotation | 90 ° | ||||
| F25/F26 | M12 | Follow repair instruction. | 100 Nm | ||
| 2AZ | Rear differential to rear axle carrier, rear | F01/F02/F03/F04/F06/F07/F10/F11/F12/F13/F18 | M14 | FOLLOW REPAIR INSTRUCTION
. Replace nut. |
175 Nm |
| F25/F26 | M14 | Follow repair instruction. Replace nut. |
165 Nm | ||
| 3AZ | Vibration absorber on front right rear axle final drive | F10/F11 | M12 | Replace nut. | 56 Nm |
| 4AZ | Vibration absorber to vibration absorber holder | F25/F26 | M14 | 100 Nm | |
| 5AZ | Front adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | Replace screws. | 120 Nm |
| 6AZ | Rear adapter to rear axle differential | F06 M6/F10 M5/F12 M6/F13 M6 | M12 | 120 Nm | |