33 34 Integral Active Steering
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - INTEGRAL ACTIVE STEERING
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Integral active front steering to rear axle carrier (Torx screw) | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M14 | 165 Nm | |
| 2AZ | Integral active front steering to rear axle carrier (bottom) | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M12 | Jointing torque | 100 Nm |
| Angle of rotation | 90 ° | ||||
| 3AZ | Integral active front steering to rear axle carrier (press-in stud) | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M14 | 165 Nm | |
| 4AZ | Grounding strap to integral active front steering | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M6 | 8 Nm | |
| 5AZ | Control unit, integral active front steering, to body | F01/F02/F06/F07/F10/F11/F12/F13/F18 | M6 | 5.7 Nm | |