61 31 704 Replacing center console operating facility (from 07/2012)

Special tools required: 

• 00 9 321

Necessary preliminary work: 

• Remove center console operating unit. See REMOVING OPERATING FACILITY  or REMOVING OPERATING UNIT (MANUAL TRANSMISSION) .

Graphic shows repair kit for center console operating facility. 

Function keys (4) absolutely must be clipped to the correct position.

Incorrect assignment may result in damage to the operating element (1) or functional impairment.

Populate symbol elements (2) and function keys (4) on operating facility (1) according to the design of the used part, no blind caps are installed, rather blocking elements (5) are placed under the corresponding function keys (4).

Fig 1: Identifying Repair Kit For Center Console Operating Facility

Courtesy of BMW OF NORTH AMERICA, INC.

Insert operating element (1) with symbol elements (2) and chrome frame (3).

Insert operating element (1) with function key (4) and, if necessary, blocking elements (5).

Fig 2: Identifying Operating Element, Symbol Elements, Chrome Frame, Function Key, And Blocking Elements

Courtesy of BMW OF NORTH AMERICA, INC.

Removing function key from operating element (e.g. if inserted incorrectly): 

Lever out function key (1) out of operating facility (2) using special tool 00 9 321 .

Check locking lugs on function key (1), these must not be damaged.

Fig 3: Removing Operating Facility Function Key Using Special Tool (00 9 321)

Courtesy of BMW OF NORTH AMERICA, INC.