61 31 299 Removing and installing/replacing clutch switch module

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary work:

NOTE: For purposes of clarity, clutch master cylinder (2) is shown removed.

Lever out clutch switch module (1) from clutch master cylinder (2) with screwdriver.

Unlock plug (4) and disconnect from housing (3).

Fig 1: Removing Clutch Switch Module

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clutch switch module is secured against incorrect installation.

Clutch switch module must snap audibly into place.

Fig 2: Installing Clutch Switch Module

Courtesy of BMW OF NORTH AMERICA, INC.