11 23 Vibration damper
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - VIBRATION DAMPER
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ |
Hub to crankshaft (head surface oiled) |
S63T 0 |
M18x1.5 |
Replace screw. |
|
| 1. Jointing torque |
100 Nm |
| 2. Angle of rotation |
60 ° |
| 3. Angle of rotation |
60 ° |
| 4. Angle of rotation |
60 ° |