11 36 Variable camshaft control
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - VARIABLE CAMSHAFT CONTROL
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | VANOS gear to inlet and outlet camshafts (contact surface on screw head must be greased with assembly paste 4.4 . See OVERVIEW OF CONSUMABLES (BMW ELECTRONIC PARTS CATALOGUE) . | N63O1 | M10x1 | Replace screw. | |
| Jointing torque | 30 Nm | ||||
| Angle of rotation | 90 ° | ||||
| 2AZ | Non-return valve VANOS to cylinder head | N63O1 | M14 x 1.5 | 20 Nm | |
| 3AZ | Solenoid valve holder to cylinder head | N63O1 | M6 | 10 Nm | |