11 66 Vacuum pump
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - VACUUM PUMP
| |
Type |
Thread |
Tightening specifications |
Dimension |
| 1AZ |
Vacuum pump to crankcase |
N55 |
M6x40 |
Flat mushroom head screw 10.9
Replace screws |
10 Nm |
| 2AZ |
Sprocket wheel to vacuum pump |
N55 |
M10x30 |
Screw 12.9 washed and oiled |
66 Nm |