11 00 Standard screw connection
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS - STANDARD SCREW CONNECTION
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Screws and nuts | N63 O 1 | M5 | 5 Nm ± 0.5 | |
| 2AZ | Screws and nuts | N63 O 1 | M6 | 8 Nm±1 | |
| 3AZ | Screws and nuts | N63 O 1 | M7 | 13 Nm±2 | |
| 4AZ | Screws and nuts | N63 O 1 | M8 | 19 Nm±3 | |
| 5AZ | Screws and nuts | N63 O 1 | M10 | 38 Nm±5 | |
| 6AZ | Hose clamp, WAF 5 | N63 O 1 | 1.0 to 1.5 Nm | ||
| 7AZ | Hose clamp, WAF 6 | N63 O 1 | 2.5 up to3.5 Nm | ||